WATER BASED ACRYLIC ROAD MARKING PAINT
YL 1K WBRM
Type: Acrylic emulsion-based, water-based road marking paint used for road markings with excellent reflective power.
Features and benefits
- High adhesion strength
- Quick Drying
- Water Based
- High UV resistance
- Matte
- Abrasion Resistant
Usage Area
For use road marking on asphalt and concrete surface, edge lines, crosswalk, airports, road kerbs.
Surface Preparation
The application surface should be cleaned from all kinds of dirt, oil, dust and loose layers and the necessary surface corrections must be done.
For applications on concrete surfaces, the concrete must be poured at least 1 month before application, the surface should be scored, and the paint should be applied with an airless spray. It is recommended to perform a test with some amount of paint on the surface for application on previously painted surfaces (water based road marking paint, etc.).
WARNING: It should not be used on surfaces of bright concrete which are rectified with helicopter concrete polisher or have previous epoxy coating.
Application
Spray ( airless), roll, brush
Surface Dry : 15-20 Min.
Dilution : Water ( if necessary up to %5)
Cleaning Up : Water
| PROPERTY | TEST METHOD | SPECIFICATION | RESULT/Declared |
|---|---|---|---|
| Colour | White | ||
| Total Solid Matter | EN 12802 | %73 - %77 | 73% |
| Binder | EN 12802 | %18 min. | 19,00% |
| Titanium dioxide Content | ASTM D 1394 | 15% | 15% |
| Hiding Power | EN 1871 | ≥95% HP4 | 96 HP4 |
| Viscosity | 80-95 KU | 82 | |
| Density | There is no value in EN 1871 | 1,55 ± 0,03gr / ml | |
| Colour | EN 1871 | Coordinates x,y within the region defined in EN 1871 for white Colour | x, y inside polygon |
| Content in Lead | 0.00% | 0.00% | |
| Luminance | EN 1871 | Min. β≥0,85 LF7 | 0,92 LF7 |
| UV Ageing | EN 1871 | UV1 | UV1 |
| Touching Drying Time | There is no value in EN 1871 | 10 Min. (23°C, %50 Relative humidity) | |
| Hard Drying Time | There is no value in EN 1871 | 20 Min. | |
| Ph | There is no value in EN 1871 | 9-10 |
| WET FILM THICKNESS (µ) | DRY FILM THICKNESS (µ) | CONSUMPTION kg / m² |
|---|---|---|
| 100 | 70 | 0.16 |
| 200 | 140 | 0.32 |
| 300 | 200 | 0.48 |
| 400 | 270 | 0.63 |
Note: The values given in the table are theoretical values.
| Drop-On Glass Beads | Consumption |
|---|---|
| (EN 1423) | 350 gr/m² |
Cautions
Take care to avoid contact with eyes.
Harmful if swallowed. Do not induce vomiting. Seek medical attention.
Refer to Safety Data Sheet for complete information.
Package and Storage
25 kg metal drums
Store in a cool and dry environment, away from direct sunlight and
protect from freezing.
Storage temperature is 5 – 35 ° C.
Shelf life is minimum 12 months.
Certificate
TS EN 1871
