Flat type two component road marking paint is an ideal solution for crosswalks, stop and slow down markings which plays an important role in trafic safety providence. This is also a suitable type road marking paint for factory and carpark ground applications, airports and racetracks.
Two component road marking paint is a product with very high physical and chemical strength which is formed by adding hardeners to it by particular ratios and gets hardened with exothermal reaction and sticks to the surface when applied.
Two component road marking paint is a product with very high physical and chemical strength which is formed by adding hardeners to it by particular ratios and gets hardened with exothermal reaction and sticks to the surface when applied.
The film thickness at the surface can be adjusted between 1 mm and 5 mm. Thanks to its high strength, it can keep its substantivity for a long period of time. Drying occurs by the chemical reaction taking place by blending powdery hardener to liquid road marking paint by the ratio of 1-2%. Therefore, application must be initiated within maximum 5-7 minutes after the hardener has been blended.
Yimtaş YL-2K flat type two component road marking paints are in the standard of highways
and complies with TS EN 1871 standard and the glass beads used complies with EN 1436 standards.
OTHER OPTIONS
The film thickness at the surface can be adjusted between 1 mm and 5 mm. Thanks to its high strength, it can keep its substantivity for a long period of time. Drying occurs by the chemical reaction taking place by blending powdery hardener to liquid road marking paint by the ratio of 1-2%. Therefore, application must be initiated within maximum 5-7 minutes after the hardener has been blended.
Yimtaş YL-2K flat type two component road marking paints are in the standard of highways and complies with TS EN 1871 standard and the glass beads used complies with EN 1436 standards.
| COLOR | CONSUMPTION AMOUNT (kg /m2) |
DENSITY gr/ml |
VISCOSITY (Daniel) |
GLASS BEADS AMOUNT (gr /m2) |
ILLUMINATION CLASS | ILLUMINATION FACTOR | DRYING TIME (minutes) |
| White | 4 - 6 | 1.94 | 13 | 400 | LF6 | ≥ 0.80 | 10 - 25 |
| Yellow | 4 - 6 | 1.94 | 13.5 | 400 | LF2 | ≥ 0.50 | 15 - 35 |
| Red | 4 - 6 | 1.95 | 13 | 400 | No Standard Required | No Standard Required | 25 - 45 |
| Blue | 4 - 6 | 1.95 | 13 | 400 | No Standard Required | No Standard Required | - |
CERTIFICATES: TS EN 1871, TS EN 1436
